Diomede Neo
Diomede Neo is critical care ventilator that acts electro-pneumatically. This device has a variety of advanced models that can be used as invasive and non-invasive ventilator.
Diomede Neo is designed to be used by adult, pediatric and neonate patients who require invasive and noninvasive ventilatory support, for a short or long period and it allows monitoring the main ventilatory parameters, it is explain that neonate category and neonatal operation modes are possible with device software upgrade. The equipment provides care for patients able or unable to make their own breathing efforts. The 18.5 inch touch screen features all the parameters of the patient’s exhalation with the wave form. The device is equipped with an electronic power supply that connects to the mains power and also is able to work with the battery as an alternative. Setting up the pneumatic parts is done by connecting to the supplemental Oxygen and Air. During mechanical ventilation, this device does not receive any energy from the patient and does not discharge any energy in the patient’s body. After entering the gases into the pneumatic section, regulated flow are controlled by a set of proportional valves, pressure sensors and regulators and the required air flow is transmitted to the patient through the inspiratory valves.
Gallery
Special Features
Ventilator CloudData Monitoring
User Friendly"Easy to Start"
FunctionalVentilator
High Resolution18.5"
OverallView
ParametersSetting
SmartModes
Touch ScreenLCD
Intelligent Features
1. Wide Patient Range
a. Neonate
b. Pediatric
c. Adult
2. Easy to Start
Comprehensive Ventilation Modes and Specifications
Modes:
a. Volume Controlled (VCV,VSIMV+PS)
b. Pressure Controlled (PCV, PSIMV+PS, NIV, PRVC, TCPL, NSIMV+PS)
c. Dual Control Modes (PSV(MVguaranteed), PSV(VTguaranteed), APRV)
d. CPAP/PS CPAP, PSV, CPAP+CF
3. Parameter Setting
a. Preview Before Apply
b. Smart automatic preset setting
4. Overall View
Monitor most important measures simple and friendly
5. Trend
a. 6 Months Patient Data
b. Record and Review all Measurements Real Time up to 6 Months
6. Monitoring
a. Swipe Pages Technology
b. Peak, Plateau, Mean, PEEP
c. I:E Ratio Current
d. Expired Tidal Volume, O2 Percentage
e. Inspiratory time (Ti) and Expiratory Time (Te)
f. Rate: Total rate expressed in breaths per minute
g. Expired Minute Volume
7. Fully Functional Respiratory mechanics Measurements
Auto-PEEP, RC Measure, Trapped Volume, Slow Vital Capacity, P0.1, PImax, PV Flex, VD/VT Physiologic
Capnography
ETCO2: Partial Pressure at the end of Expiration
PECO2: Mean Expired CO2 Partial Pressure
VD/VT: Ratio between the Serial Dead Space and the Current Volume
Va: Alveolar Volume of Each Breath
Vd: Serial or Anatomical Dead Space Volume of each Breath
VTCO2: CO2 expired Volume per Breath
Videos
